All news
2012-01-05IFAT Entsorga Munich 2012
Most welcome to visit our stand at the IFAT exhibition in Munich 7-11 May 2012.
Tomal will show interesting Metering Equipment for solids handling together with ProMinent at stand 431/530 in Hall A3.
You will have the great opportunity to discuss solutions with our engineers and you will also get the change to view our dust free big bag solution combined with our reliable and accurate multiscrew feeder.
2011-12-21
Production building finalized
Tomal is expanding with a new Production building for possibility to handle
larger and heavier silos and also for rationalization of assembly and logistics.
The total new area will be approx 660 m2 and will be finalized at the end of 2011.
Initiation of the new building
21st of December 2011, the new building was inaugurated. The ribbon was cut
and staff could enjoy new production areas for better logistics and handling of
large silos.
The first silo is delivered into the new building 14.11.2011.
Updated photo 6th of October, 2011.
Updated photo 23rd of September, 2011.
Updated photo 19th of September, 2011.
Updated photo 15th of August, 2011
Updated photo 6th of July, 2011:
Today on the 13th of July, 2011 the first step is taken removing old asphalt for
possibility to start making the foundation, see photo.
2011-02-21
Exhibition Schüttgut in Dortmund
Welcome to easyFairs Schüttgut 2011 in Dortmund.
2010-03-23
Large order to Poland
Delivery of a plant for feeding powder fuel on a Polish Power plant.
In successful co-operation with ProMinent in Poland, Tomal received, at the beginning of February, the largest order ever, worth 2,0 million EUR. A plant for feeding bio fuel will be delivered to a coal-fired power plant in Krakow. One of the boilers shall be converted to burn bio fuel instead of coal powder.
Background.
The pressure from the environmental organisations and EU to reduce the burning of fossil fuels and thus reduce the addition of green house gas to the atmosphere is the background for the order.
The demand from EU is that Poland shall replace 20% of the fossil fuels with renewable fuels by 2020 compared to the level in 1990 according to EU´s climate goal.
Scope of supply.
The delivery from Tomal consists of a storage silo with discharge and conveying system to four day silos, each with four feeders and pneumatic conveying to 16 burners. Total feeding capacity is 16 x 13m³/h which is approx. 200m³ bio fuel/h or 44 tons/h. This corresponds to approx. 200MW.
Erection supervision and commissioning is included.
The plant will be delivered in stages from the beginning of April to the end of June. Erection will take place during the summer and commissioning during autumn. The plant should be ready for taking over by the end user in December 2010.
World leading concerning feeding of powder fuel.
In the beginning of the 90’s burning of renewable biomass was favoured as they were exempt from the CO2-tax. At that time Tomal successfully started to develop feeding plants for powder fuels. During the years Tomal has extended the delivery range and is now able to deliver and take responsibility for a whole plant from the pellet mills to the burners.
Tomal’s unique multiscrew feeders are the heart of the plant. They give an accurate and very even flow of powder fuel to the burners. This gives a stabile flame from the burners and possibility to optimise the combustion and to minimise the creation of nitrogen oxides (Nox), gases which lead to acid rain and give penalty fees.
2009-11-12
Watec Exhibition Tel Aviv
Tomal will participate at the Watec Exhibition Center in Tel Aviv.
Visit Tomal at Hall 1, Booth 42, together with the Embassy of Sweden.
At the exhibition you will have the possbility to see our Tomal multiscrew feeder that gives you a reliable discharge and accurate metering.
Meet our Managing Director, Teddy Eriksson, and discuss any existing Tomal plant or any new investment for Water Treatment applications or other application where you require a high quality metering equipment for solids.
See also: http://www.watec-israel.com/
2009-10-01
Highest Credit Ranking !
Once again, Tomal has been recognized as one of the small percentage of companies for highest credit ranking, Trippel A.
The recognition is made by the credit- & business information company Soliditet.
2009-06-04
Lloyds case study
Tomal is one approved company among others as Atlas Copco, TNT, Boeing, FedEx Express that has been awarded to participate in a case study for Lloyd's Register.
Check out the success story at the following address at Lloyd's Register home page:
http://www.lr.org/Industries/LRQA/Case+studies/
Tomal has been certified according to ISO 9001 since 1995 and after the recent approved revision we are proud to be one of the successful companies.
Take also the opportunity to read the success story in the pdf-file below.
2009-02-16
Achema 11-15 May, 2009
We will together with ProMinent Dosiertechnik GmbH join the Achema exhibition 2009 in Frankfurt am Main.
Visit us in hall 8, position D2-E8.
Our well-experienced sales engineers will be available for you, helping out with any technical issue regarding our high-quality metering equipment for solids handling.
2008-09-25
International Chemical Exhibition EXPOQUIMIA
Visit us at the International Chemical Exhibition EXPOQUIMIA in Barcelona, Spain.
You will have the possibility to see our reliable and safe multiscrew feeder for solids metering and our high effective Polymore unit for liquid emulsion polymer.
Also take the opportunity to meet our Tomal engineer or anyone of our well-experienced distributor from Tecnidos Sistemas y Procesos SL.
Visit us at Hall 1 Level 0, Street G 711.
2008-09-08
Tomal have expanded
The new building has been finalized!
It will be used for storage of fully tested equipment ready for delivery, pre-manufactured components and purchased parts.
Total new available area is 1200 m2.
Thanks to the new building, we will now have more space available for increased production and installation in the existing production facilities.
2008-09-03
Process Technology Fair in Gothenburg
Visit us at Scandinavia's leading Process Technology Fair.
The fair takes place in Gothenburg 7-9th of October 2008.
During the exhibition you have a possibility for detailed technical discussions with our sales engineer. There is also a possibility to see some of our accurate metering equipment.
We are in the booth C03:22 together with ProMinent.
For further information visit: http://nemonet.swefair.se/templates/StartPageMain____164592.aspx
2008-06-27
Successful Training
A successful training has been finalised with ProMinent market subsidiaries at Tomal.
Totally 21 people from 15 different countries participated in the different seminars giving a technical and sales oriented education.
Thanks to all participants ! We hope you had a pleasant time and believe that you now have got new technical skills for possibility to assist your customers and end users in your different market areas around the world.
2008-05-20
Exhibitions
Most welcome to join the 14th International Exhibition for Suppliers to the Pulp and Paper Industry, SPCI in Stockholm, Sweden May 27-29.
We are in stand A04:01 together with Prominent. For more information: http://www.spci2008.com/
Also welcome to join the World Bio Energy Exhibition in Jönköping, Sweden May 27-29. We are in stand A05:41. For more information: http://www.elmia.se/worldbioenergy/
We also have the opportunity to give you some engineering expertise around the Tomal feeding equipment at IWEX, International Water & Effluent Exhibition in Birmingham May 20-22. For more information: http://www.sustainabilitylive.com/slive08/iwex/
2008-03-20
NEW Homepage
Welcome to our new home page that was published Thursday the 20th of Mars 2008.
The home page include all brochures available to download for each standard product.
We will regularly update interesting deliveries from Tomal.
If you have any queries or comments, please do not hesitate to send this by mail to our IT Manager Magnus Dahl (magnus.dahl@tomal.se).
Once again most welcome!
Back
